USING YOUR AIR CONDITIONER (Cont.)

Freezing Conditions: This is a cooling only air conditioner. It is not designed for freezing outdoor conditions. It must not be used in freezing outdoor conditions.

Remote Control: To ensure proper operation when using the remote control, aim the remote directly at the signal receiver on the air condi- tioner.

The remote control has a signal range up to 20 feet.

Make sure nothing is blocking the remote con- trol signal from being received by the air con- ditioner.

Make sure the batteries are installed correctly and still have power.

Cooling Mode: Use the COOL mode at Low, Me- dium, High, or Auto Fan speed when cooling is needed. Use the temperature ▲/▼ buttons to set the desired temperature between 64°F and 86°F.

Once the temperature is set, the compressor will cycle on and off to keep the room temperature at the set temperature level. The lower the set thermostat temperature, the cooler the room will become. The higher the set thermostat temperature, the warmer the room will become.

For Normal Cooling - Set the Mode to Cool and the Fan to High or Med with the termperature set in the middle.

For Maximum Cooling - Set the Mode to Cool and the Fan to High with a lower set temperature.

For Quieter & Nighttime Cooling - Set the Mode to Cool and the Fan to Low with the temperature set in the middle.

NOTE: If the air conditioner is off and is then turned on while set to a Cool setting or if turned from a fan setting to a Cool setting, it may take approximately 3 minutes for the compressor to start and cooling to begin.

Energy Saver Mode - Controls the Fan

Fan Only Mode: Use Fan Only mode at Low, Med, or High fan speed to provide air circulation and filtering without cooling. Since fan only setting do not provide cooling, a Set temperature cannot be entered. The room temperature will appear in the display.

NOTE: Auto Fan Speed cannot be used in Fan Only mode.

Loss of Power Protection: If power to the air conditioner is lost or interrupted, the air condi- tioner will automatically re-start in the setting last used prior to power loss. If the Timer was set to automatically turn the air conditioner off or on, it will resume countdown at the amount time left prior to power loss. You may need to set a new time if desired.

Air Direction: Use the lever near on the front air vents to adjust the direction of the airflow. You can direct the airflow left or right only. The lever is located on the right side of the air vent.

On - The fan will cycle on and off with the compressor. This results in winder variations of room temperature and humidity. Normally used with the room is unoccupied. NOTE: The fan my continue to run for a short time after the compressor cycles off.

Off - The fan runs all the time in fan or cooling mode.

10

Page 11
Image 11
Soleus Air SG-WAC-12ESE, SG-WAC-10ESE manual Using Your AIR Conditioner

SG-WAC-12ESE, SG-WAC-10ESE specifications

The Soleus Air SG-WAC-10ESE and SG-WAC-12ESE are portable air conditioners designed to provide effective cooling solutions for small to medium-sized spaces. Both units blend efficiency, convenience, and versatility to create an appealing option for homeowners and renters alike.

One of the main features of the Soleus Air SG-WAC-10ESE and SG-WAC-12ESE is their energy-efficient design. Both units are equipped with a high-efficiency compressor that significantly reduces energy consumption while delivering superior cooling performance. The Energy Efficiency Ratio (EER) ratings for these models highlight their ability to cool effectively without unnecessary energy usage. This translates into lower electricity bills and a reduced environmental footprint.

These air conditioners come with a range of operating modes, including cooling, dehumidifying, and fan-only settings. This versatility allows users to customize their indoor environment based on their specific needs. The dehumidifying function is particularly beneficial in humid climates, as it helps to reduce moisture levels, providing additional comfort and preventing mold growth.

The Soleus Air SG-WAC-10ESE and SG-WAC-12ESE are also designed with user convenience in mind. The units feature an easy-to-use LED display and remote control, offering an intuitive interface for adjusting settings from across the room. Additionally, the programmable 24-hour timer allows users to set the air conditioner to operate only when needed, enhancing energy savings.

Portability is another key characteristic of these models. Both units come with caster wheels and built-in handles, making it easy to move them from room to room as needed. This feature is particularly useful for those who want to cool different areas of their home throughout the day.

Noise levels are minimized in the Soleus Air SG-WAC-10ESE and SG-WAC-12ESE, making them suitable for bedrooms and living areas. The air conditioners employ a whisper-quiet operation that maintains a peaceful environment while providing effective cooling.

In terms of installation, these window units come with a comprehensive installation kit, ensuring a hassle-free setup process. Their sleek design fits well with various interior styles, allowing them to blend seamlessly into any space.

In summary, the Soleus Air SG-WAC-10ESE and SG-WAC-12ESE are efficient and user-friendly air conditioning solutions that prioritize comfort, convenience, and energy savings. With their range of features and technologies, they are well-suited for meeting the cooling needs of diverse living environments.