IMC Networks AccessEtherLinx/4 operation manual Using Telnet

easily upload and store new firmware versions for upgrading multiple devices with on-board logic installed in, or connected to, an iMediaChassis series.

Using Telnet

Assign the AccessEtherLinX/4 an IP Address or use the default IP Address 10.10.10.10, subnet mask 255.0.0.0 before using a Telnet session. All configurations done via the serial port can also be performed using Telnet. Use only one Telnet session at a time. Do not use an RS-232 serial session and a Telnet session at the same time.

Use Hyper Terminal to access the CLI (Command Line Interface). The manual will describe how to do this.

Configuring the AccessEtherLinX/4 to Act as a Simple Media Converter with a Switch

Use Hyper Terminal to access the CLI (Command Line Interface). The manual will describe how to do this.

16