1
About the AccessEtherLinX/4
The AccessEtherLinX/4 Series enables service
providers to offer differentiated data
networking or
VPN services to multi-tenant building and business
customers.
Residing at the customer premises or at
the service provider POP, AccessEtherLinX/4
provides
a VLAN-based Layer 2 entry point to the MAN fiber
network, trunking,
differentiating and separating
customer traffic. Featuring SNMP management,
bandwidth control, QoS, traffic prioritization and
multicast pruning (using IGMP v1,
v2), it is an ideal
solution for delivering Ethernet-based services to customers quickly
and cost-effectively.
AccessEtherLinX/4 offers configuration access via Telnet, serial console and SNMP
software. Software upgrades can be initiated via any one of these access methods
using a TFTP server. Additionally IMC’s iConfig/ iView² can be used for software
upgrades as a single source solution.
The AccessEtherLinX/4 includes
one Uplink port (either 100Base-FX fiber or 10/100
twisted pair),
four 10/100 twisted pair Ethernet
downlink ports (for connecting
users/LANs) and an internal 100 -
240 ±10% AC power supply.
Single-strand fiber versions of the AccessEtherLinX/4 are also available.
Installing the AccessEtherLinX/4
The AccessEtherLinX/4 comes ready to install; there is no hardware configuration
required. All features, such as FiberAlert and Auto Negotiation, are software
configurable.
Place the AccessEtherLinX/4 on a flat surface, prior to installation. Attach the cables
between the AccessEtherLinX/4 and each device that will be interconnected and then
plug the unit into a reliable, filtered power source.
Rackmount Installation
The Rackmount kits for the AccessEtherLinX/4 are sold separately:
Description Part
Number
Accessories Installation
19" Rackmount
brackets
895-39226 Includes two brackets
that screw onto either
side of the
A
ccessEtherLinX /4
.
The brackets are
attached to the unit and
then the A
ccessEtherLinX
/4
is installed into the
rack.
19" Rackmount
shelf
895-39949 Fits into the 19" rack
and holds up to 3 units
of the A
ccessEtherLinX/4
.
The A
ccessEtherLinX /4
can be secured to the
shelf.
INSTALLATION TIP