accept) and press Enter. This function enables ALL of the device’s traps. To selectively activate and
Removing Trap Destinations
To remove all trap destinations, press K. When asked to confirm, press Y to continue or N to abort. Then, press Enter.
Creating Community Strings
The purpose of community strings is to add a level of security to a network. The default community string is named “public” and has read/write access. Add the necessary custom community strings such as one with
•R =
•W = read/write access
•Enter = abort
Press Enter. When finished, press Enter and then type Reboot for changes to take effect. The Saved Values and Current Values should now both display the changes made (e.g., new IP address and subnet mask).
Deleting Community Strings
To delete all community strings and start over, press U. When asked, “Are you sure you want to delete all future strings?”, press Y to proceed or N to abort. Press Enter.
This function will delete ALL community strings. Use iConfig to selectively delete community strings.
About DHCP
DHCP Disable (Static IP Addressing)
DHCP is disabled in the default configuration. Initially, modules are assigned a Static default IP Address of 10.10.10.10. Changes to the Static IP Address can be added manually through iConfig, an
DHCP Enable (Dynamic IP Addressing)
If a DHCP server is present on the network and DHCP is enabled, the DHCP client will initiate a dialogue with the server during the boot up sequence. The server will then issue an IP address to the management card. Once the new IP address is
8
