3
mode. If the device has a fiber Uplink port, it does not Auto Negotiate; it always
operates at 100 Mbps Full-Duplex.
Auto Negotiation
The AccessEtherLinX/4 ships with Auto Negotiation enabled on the twisted pair ports.
In this mode, the twisted pair port negotiates for speed and duplex mode.
Forcing the Speed and Duplex Mode
The twisted pair downlink ports on the AccessEtherLinX/4 can also be manually set
for 10 Mbps or 100 Mbps operation and for Half- or Full-Duplex (i.e. 10 Mbps Full-
Duplex, 10 Mbps Half-Duplex, 100 Mbps Full-Duplex or 100 Mbps Half- Duplex).
Selective Advertising
Selective Advertising, when used in combination with Auto Negotiation, advertises
only the configured speed and dupl ex mode for the twisted pair port.
If a specific speed and/or duplex mode is desired, use Selective Advertising, rather
than Force Mode, when connecting to devices that ONLY Auto Negotiate.
Bandwidth Control
The AccessEtherLinX/4 includes bandwidth control functionality. Bandwidth can be
set independently, in 32 Kbps increments, on each downlink port, or bandwidth can
be assigned to the entire unit via the uplink port. Refer to the help file for software
configuration information.
About iView²
iView² is a cross-platform network management application for intelligent networking
devices. It features a graphic user interface (GUI) and gives network managers the
ability to monitor and control devices from virtually any 32-bit Windows platform.
iView² can also function as a snap-in module for many SNMP applications. Refer to
the help files for iView² and AccessEtherLinX/4 for information regarding configuring
and managing the AccessEtherLinX/4.
About iConfig
iConfig is an in-band configuration utility that lets users quickly and easily complete
the first stages of SNMP configuration for SNMP-manageable devices. Tasks iConfig
can perform include: