IMC Networks AccessEtherLinx/4 operation manual Appendix

When using iView² with HP OpenView

During the installation, the iView² application will ask if HP Open View is installed on the management PC. Click Yes to integrate the appropriate files. Once in OpenView, select IMC Networks from the toolbar to view the IMC Networks’ devices.

When Not Using iView²

When using an application other than iView² for management, integrate the SNMP vendor files (a.k.a. MIBs) into the application. The SNMP agent uses the following Enterprise-specific MIB file and standard MIBs, which can be found in the MIB directory on the CD included with the iMediaChassis/3: MCIMCV2C.MIB Enterprise specific information for the agent. For example, configuration information, port type information, link status, etc.

Using the IMC MIBs

Refer to the MIBs folder located with the iView² software for product-related MIBs.

Appendix

The AccessEtherLinX/4 offers an optional method of configuring the device via a Console session by connecting an RJ-45 to DB9 adapter. This adapter is available for purchase through IMC Networks. End users can also wire their own adapter using the schematic below.

21