Sonance BPS-1 installation manual Selecting the Proper Adaptor Baffle, Architectural Series

Architectural Series™

BPS - 1 I N - C E I L I N G S U B W O O F E R

I N S T A L L A T I O N M A N U A L

NOTE: DO N OT U S E N A I L S TO AT TA C H T H E TE M P O R A R Y BR A C K E T S — T H E Y W I L L B E R E M O V E D A F T E R T H E BPS -1C A B I N E T I S AT TA C H E D TO T H E J O I S T.

5. Remove the Drilling Template from the joist.

6. Place the BPS-1 cabinet on the temporary brackets, aligning its mounting holes with the holes drilled through the joist. (Insert shims underneath the cabinet as necessary to bring its mounting holes in alignment with the holes

drilled in the joist.)

7. Screw the eight included lag
screws through the holes in
the joist and into the holes in
the side of the BPS-1 cabinet,
as shown in Figure 5. Use the
shorter lag screws for I-joist
construction; use	the longer
lag screws for standard joist
construction.
8. After confirming	that	the	5/16”
BPS - 1 cabinet is securely			Lag Screws
attached to the joist, remove
the temporary brackets		from	Figure 5: Using the Included Lag Screws to Attach the BPS-1 to the Joist
the underside of the joists.

Selecting the Proper Adaptor Baffle

Sonance has BPS-1 Adaptor Baffles available that mate the BPS-1 to every size round and square Architectural Series panel bracket. The Adaptor Baffles provide proper acoustic performance without creating port noise or buzzing during operation.

Select the Adaptor Baffle that fits the particular size and shape Architectural Series Panel Bracket you installed. BPC8R/S fit 8” Panel Brackets, BPC6R/S fit 6” Panel Brackets, BPS4R/S fit 4” Panel Brackets (see Figure 6).

Figure 6: BPS-1 Adaptor Baffles (left to right): BPC8S, BPC8R, BPC6S, BPC6R, BPC4S, BPC4R

The Adaptor Baffles include Allen screws, an Allen wrench and Locktite.

Page 3 of 8