Architectural Series™
BPS - 1 I N - C E I L I N G S U B W O O F E R
I N S T A L L A T I O N M A N U A L
Connecting the Vent Tube and Adaptor Baffle
1. Use a Phillips screwdriver to remove the four screws that attach the paint shield to the Architectural Series Panel Bracket (see Figure 7).
2. Feed several inches of the Vent Tube through the Panel Bracket’s speaker opening (see Figure 8).
Remove | Sonance Architectural Series |
WWW.SONANCE.COM | |
800.582.7777 | |
Screws | B6R |
| |
| 5/8” |
| DRYWALL |
| Figure 7: Remove Panel Bracket |
| Paint Shield |
Figure 8: Pull End of Vent Tube |
Through Opening in Panel Bracket |
3. Fit the Vent Tube Clamp (included with the Adaptor Baffle) loosely around the vent tube (see Figure 9).
4. Insert the Adaptor Baffle’s neck into the Vent Tube opening (see Figure 10).
Fit Clamp
Onto
Vent Tube
Figure 9: Fit the Clamp Onto the Vent Tube
Insert Adaptor |
Baffle Neck |
Into Vent Tube |
Figure 10: Fit the Adaptor Baffle Neck Into the Vent Tube |
Page 4 of 8
