INSTALLATION QUICK START

Read “Getting The Most From Your Sonance Silhouette Speakers” and plan speaker locations.

If this is your first installation of a Sonance Silhouette system, read all of the installation instructions before beginning.

Choose high quality (oxygen-free, multi-strand) copper wire to make the wire runs between your audio equipment and your Sonance Silhouette speakers. Larger wire than normal is recommended. to reduce resistance which eliminates power losses between your audio equipment and your in-wall Sonance Silhouettespeakers. Follow the information listed below:

•14 gauge for less than 30 feet.

•12 gauge for between 30 and 75 feet.

•10 gauge for greater than 75 feet.

Verify adequate parts and tools for the installation:

PARTS LIST / TOOL LIST

NEW CONSTRUCTION

RETROFIT

PARTS

Construction Adhesive

(not included)

Silicon Sealer (not included)

Drywall Screws (not included)

TOOLS

Electric Drill (1/4" - 3/8" drive)

Phillips Bit

1" Flat Bit

Stiff Wire (coathanger, fishtape)

Torpedo Level

Wire Strippers

Keyhole or Drywall Saw

Gloves

Eye Protection Goggles

Chart A. Installation Parts and Tools List for Sonance Silhouette speakers.

13