INSTALLATION SAFETY
When installing Sonance Silhouette speakers, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1.Read and understand all instructions.
2.Never drill or cut into wall cavities that already contain electrical wiring or plumbing.
3.Follow all warnings and instructions in this manual and marked on the product.
4.Always exercise caution when working in unfinished spaces such as attics. Areas with exposed joists present a significant danger of injury from falls or stepping on nonstructural surfaces. Before working in areas with exposed joists,always create temporary walkways using plywood or dimensional lumber strong enough to support your weight.
CARE AND MAINTENANCE
1.Retain the safety and operating instructions for future reference.
2.Any service or repair required must be performed by qualified, factory authorized personnel.
3.Do not use liquid or aerosol cleaners on the speakers.
4.To clean your speakers, wipe the grilles with a soft cloth dampened with water. You may remove the grilles to wash and dry them. The baffle and drivers may be dusted by gentle use of “canned air” commonly used to clean cameras and computer equipment.
5.Do not expose your Sonance Silhouette speakers to direct sunlight or high heat. Extended periods of exposure may cause deterioration of adhesives and driver materials, compromising the useful life of the speakers.
6.Sine wave test tones can damage your Sonance Silhouette speakers and should only be used at low volume levels for short periods.
7.Do not expose your Sonance Silhouette speakers to construction dust, dirt, or airborne paint particles. If the area in which your speakers are installed is subject to potentially damaging airborne particles, you may remove the grilles, temporarily cover them with paper or plastic food wrap, then replace them over the speakers. Be sure to remove this protective cover after the dirty activity is complete and the room is
14