STEREO RECIEVER

SPEAKER A

SPEAKER B

Two Wire

Special JumperConductor

Connectors

Figure 9: Two Wire Connection

FINAL ASSEMBLY

 

 

1. Strip 1/2" of insulation from each speaker

the red 5-way

binding post and the negative wire to the

on the binding post

until the hole in the post is visible. Insert

the slot, then snug

the nut. Do not over tighten.

 

NOTE: Polarity of wiring is critical.

be attached to red

connectors throughout the

 

2. Rotate all Roto-Lock

 

edge to their OPEN position.

3. Carefully lift the speaker

 

4. Use a screwdriver to

 

fasteners visible in the channel of the extruded

aluminum frame

. Sonance’s Roto-Lock mounting system firmly attaches

the Sonance

the wall by means of a foot that rotates into place, securely

clamping the

surface.

 

5. Insert

in the extruded frame starting at one of the short ends and working

the

.

 

22