Sonance Sonamp ASAP3D SE Stereo Power Amplifier Important Safety Instructions

SO N A M P ® ASAP3D SE ST E R E O PO W E R AM P L I F I E R

Important Safety Instructions

Basic safety precautions should always be followed when using your ASAP3D SE amplifier, to reduce risk of fire, electric shock, and injury to persons:

1.Read and understand all instructions.

2.Retain these instructions for future reference.

3.Follow all warnings and instructions in this manual and marked on the product.

4.Any service or repair required must be performed by qualified factory-authorized personnel.

5.Do not use the amplifier in a high-humidity environment or near water — for example in a wet basement, or near a wet bar or swimming pool.

6.Always provide adequate ventilation for the amplifier. Allow a minimum of two (2) inches on all sides of the amplifier. Do not block the cooling vents on the amplifier case.

7.The amplifier should be situated away from heat sources such as heat registers, radiators, stoves, or other appliances that produce heat.

8.The amplifier should only be connected to a power supply of the type marked on its back panel. The power supply cord should be routed to avoid damage from contact with sharp objects or being stepped on.

9.Unplug the amplifier during thunderstorms or when it will be unused for extended periods of time.

10.Exercise care to avoid spilling liquids on or in the amplifier.

11.Do not place the amplifier on an

unstable table, stand, or cart. Improper placement of the amplifier may cause it to fall on an adult or child causing serious injury, as well as damage to the amplifier.

12.Do not expose the amplifier to

dripping or splashing. Do not place objects filled with liquids, such as vases, on the amplifier.

13.Cleaning: To clean the amplifier, wipe it with a soft cloth. Do not use solvents, as they may damage the amplifier.

14.Non-Use Periods: Unplug the amplifier’s power cord from the electrical outlet when the amplifier will be unused for a long period of time.

15.Damage Requiring Service: The amplifier should be serviced by qualified service personnel when:

A.The power cord or plug has been damaged

B.Objects have fallen, or liquids have been spilled into the amplifier

C. The amplifier has been exposed to rain.

D. The amplifier does not appear to be operating properly or exhibits a marked change in performance.

E. The amplifier has been dropped or appears to have been damaged.

16.Servicing: The user should not attempt to service the amplifier beyond that described in these instructions. All other servicing should be referred to qualified service personnel.

17.Storms: To prevent damage to components, unplug all electronic equipment during thunderstorms.

2