Using the Telephone, Answering a Call | Sonic Alert AMPLI600

USING THE TELEPHONE

Answering A Call

During an incoming call, your phone will ring and then the number and/or the name of the caller will be displayed on the screen, if you have subscribed to a Caller Display service.

Using the handset

●Lift the handset and speak.

●To end the call, replace the handset.

Hands free

●Your Ampli600 allows you to speak hands free. When the phone rings, press SPKR. The caller’s voice will be heard through the loudspeaker and they will hear your voice via the microphone near the SPKR button. The speakerphone symbol will appear on the display.

●To end the call, press SPKR again.

Using the inductive coupler for hearing aids

●Turn your hearing aid to the ‘T’ setting.

●Use the phone handset as usual but the inductive coupler will feed the incoming call directly into your hearing aid.

Note: users of digital hearing aids must make sure their aids have been programmed for use with the ‘T’ setting.

Making A Call

Using the handset

●Lift the handset and when you hear the dialling tone, dial the number on the keypad.

●To end the call, replace the handset.

Pre-dialling

●Key in the required number without lifting the handset.

●Use the C key if necessary to cancel and correct a wrong digit.

●Lift the handset and the number will be automatically dialled.

●To end the call, replace the handset.

18

Image 18

Sonic Alert AMPLI600 manual Using the Telephone, Answering a Call, Making a Call

Contents

Page Contents Introduction Unpacking the Ampli600 Installation Setting UpDesk Installation Wall Mount Installation Remote control DescriptionPage Screen example On hook position Screen display Page Alarm and Ringer Settings SettingsRinger Volume Ringer Tones Dialling Mode Date / Time Format and setting Format Language Setting Setting Time/date Screen Contrast Adjustment Auto On Hook Auto Screen Sizing -DIMX--x Area and Long Distance Code Setting Using the Telephone Answering a CallMaking a Call Switching between Speakerphone and Handset Call Time CounterLast Number Redial Recalling Recent Numbers Deleting Recent NumbersMute Function Flash One Touch Memory Keys To store a numberDialling stored Numbers Emergency Contact Create Emergency Contact SOS Numbers Create the Emergency SOS Message Using the Emergency Contact Telephone Play the Emergency SOS Message Cancel an Emergency Contact SOS Call Testing the Remote BandChange the Remote Band Battery Remote Audio Monitoring Remote Monitoring Activate Remote Audio Monitoring Setting the Remote Audio Monitoring Access PIN Code Using Remote Audio Monitoring Optional Accessories HeadsetTo use the headset Shaker Receiving Volume and Tone Adjustment Volume and ToneSending Level Adjustment Extra Volume Adjustment Switch Handset Ampliﬁer Phonebook Create a Phonebook EntryKey Characters Create an Entry from the Caller Display Log Make a call from a Phonebook Entry Delete a Phonebook Entry Modify a Phonebook Entry Caller Display Use a Number from the Caller Display Log Delete a Number from the Caller Display Log Delete all Numbers from the Caller Display Log Call Waiting Call Waiting in Practice NEW CALL/MESSAGE LED Message Waiting LED No display TroubleshootingNo number is displayed when the telephone rings Telephone does not ring No ampliﬁcation No response on LCD displayNo Strobe Ringer and/or bed shaker will not activate There is Interference on the line General Safety InformationCleaning Environmental Regulatory Compliance This equipment is hearing aid compatible Guarantee East Maple Rd Troy, MI Ph 248577 Fax