Switching between Speakerphone and Handset | Sonic Alert AMPLI600

USING THE TELEPHONE

Hands free

●Key in the required number without lifting the handset.

●Use the C key if necessary to cancel and correct a wrong digit.

●Press SPKR and the number will be automatically dialled. The speak- erphone symbol will appear on the display.

●When the call is answered, simply speak into the microphone located on the base

●You can adjust the speaker level with the slide button located on the left side of your telephone.

●To end the call, press the hands free button again.

Switching between Speakerphone and Handset

To stop using speakerphone during a call, simply lift the handset.

To activate speakerphone during a call, press SPKR and replace the head- set on the cradle at the same time

Hands free calls can also be made using an optional headset –see Optional Accessories chapter

Call Time Counter

The call time counter will be displayed a few seconds after the phone num- ber is connected and starts ringing.

To stop the time counter, press C

If you press C twice, the time counter will be reset to 0.

Last Number Redial

Lift the handset or press SPKR or press Headset

(if headset plugged in)

Await the dial tone and press REDIAL

The previously dialled number will be automatically redialled

19

Image 19

Sonic Alert AMPLI600 manual Switching between Speakerphone and Handset, Call Time Counter, Last Number Redial

Contents

Page Contents Unpacking the Ampli600 Introduction Setting Up InstallationDesk Installation Wall Mount Installation Description Remote controlPage Screen example On hook position Screen display Page Ringer Tones SettingsRinger Volume Alarm and Ringer Settings Dialling Mode Format Date / Time Format and setting Setting Time/date Language Setting Auto On Hook Screen Contrast Adjustment Auto Screen Sizing -DIMX--x Area and Long Distance Code Setting Answering a Call Using the TelephoneMaking a Call Call Time Counter Switching between Speakerphone and HandsetLast Number Redial Deleting Recent Numbers Recalling Recent NumbersMute Function Flash To store a number One Touch Memory KeysDialling stored Numbers Create Emergency Contact SOS Numbers Emergency Contact Create the Emergency SOS Message Play the Emergency SOS Message Using the Emergency Contact Telephone Remote Audio Monitoring Testing the Remote BandChange the Remote Band Battery Cancel an Emergency Contact SOS Call Activate Remote Audio Monitoring Remote Monitoring Using Remote Audio Monitoring Setting the Remote Audio Monitoring Access PIN Code Headset Optional AccessoriesTo use the headset Shaker Extra Volume Adjustment Switch Volume and ToneSending Level Adjustment Receiving Volume and Tone Adjustment Handset Ampliﬁer Create a Phonebook Entry PhonebookKey Characters Create an Entry from the Caller Display Log Delete a Phonebook Entry Make a call from a Phonebook Entry Modify a Phonebook Entry Caller Display Delete a Number from the Caller Display Log Use a Number from the Caller Display Log Call Waiting Delete all Numbers from the Caller Display Log Call Waiting in Practice Message Waiting LED NEW CALL/MESSAGE LED Telephone does not ring TroubleshootingNo number is displayed when the telephone rings No display There is Interference on the line No response on LCD displayNo Strobe Ringer and/or bed shaker will not activate No ampliﬁcation Environmental Safety InformationCleaning General Regulatory Compliance This equipment is hearing aid compatible Guarantee East Maple Rd Troy, MI Ph 248577 Fax