| Table 3: Log Viewer Messages |
|
|
ERROR | is not a valid XAuth status. |
|
|
ERROR | ISAKMP SA delete msg for a different SA! |
|
|
ERROR | No certificate for CERT authentication. |
|
|
ERROR | No entry in the system IP address table was found with index. |
|
|
ERROR | No KE payload while PFS configured mess_id. |
|
|
ERROR | Out of memory. |
|
|
ERROR | Phase 1 authentication algorithm is not supported. |
|
|
ERROR | Phase 1 encryption algorithm is not supported. |
|
|
ERROR | Protocol ID has already been added to the SA list. |
|
|
ERROR | Protocol mismatch: expected PROTO_IPSEC_AH but got. |
|
|
ERROR | Protocol mismatch: expected PROTO_IPSEC_ESP but got. |
|
|
ERROR | Publisher deregistration failed. |
|
|
ERROR | Responder cookie is not zero. |
|
|
ERROR | RSA signature processing failed - signature is not valid. |
|
|
ERROR | SA hash function has not been set in. |
|
|
ERROR | Signature Algorithm mismatch is X.509 certificate. |
|
|
ERROR | Signature verification failed! |
|
|
ERROR | The certificate is not valid at this time. |
|
|
ERROR | The current state is not valid for processing mode config payload. |
|
|
ERROR | The current state is not valid for processing signature payload. |
|
|
ERROR | The first payload is not a hash payload. |
|
|
ERROR | The following error occurred while trying to open the configuration |
| file: |
|
|
ERROR | The peer is not responding to phase 1 ISAKMP requests. |
|
|
ERROR | The peer is not responding to phase 1 ISAKMP requests. |
|
|
ERROR | The state flag indicates that the IPSEC SA payload has not been |
| processed. |
|
|
ERROR | The system interface table is empty. |
|
|
ERROR | The system IP address table is empty. |
|
|
ERROR | Unable to compute hash! |
|
|
ERROR | Unable to compute shared secret for PFS in phase 2! |
|
|
ERROR | Unable to read configuration file. |
|
|
ERROR | User did not enter XAuth next pin. |
|
|
Page 56 SonicWALL Global VPN Client 4.0 Administrator’s Guide