Sonos 200 manual Before You Begin, Svenska Nederlands Deutsch English

SVENSKA NEDERLANDS DEUTSCH ENGLISH

2 Sonos Controller 200

Before You Begin

If you are setting up a new Sonos Multi-Room Music System, Sonos recommends you set up at least one ZonePlayer (or ZoneBridge) before adding a Sonos Controller 200 to your music system. For help with this step, you can refer to the Quick Setup Instructions included with your ZonePlayer(s).

Note: The Sonos Controller 200 is compatible with Sonos software version 3.0 or later. If you are adding to an existing Sonos system, use the Desktop Controller software to check for the latest Sonos software update by selecting Help→Check for Updates. Once you update your music system, you can add the Sonos Controller 200.

Once you’ve got one or more zones set up, connect the power adapter to the back of the charging cradle (included) and plug the cradle into a power outlet. Place the Controller 200 into the charging cradle to wake it up (the screen will come alive when it’s ready), and then follow the Controller’s on-screen instructions to add it to your Sonos Multi-Room Music System.

For battery charging or battery replacement information, you can turn to page 13.