
6 Click [Write to
.
Place a new
bNote
•
7 Click [Start].
Saving to a
.
8 Click [No] when you want to finish.
The disc tray comes out automatically.
.
To create another copy with the same content, click [Yes], then place a new CD- R in the disc drive.
Creating a Video CD (Direct Access to Video CD Burn)
– Picture Package VCD Maker
You can copy recorded movies on a tape to a Video CD using a computer equipped with a disc drive compatible with
The following procedure describes how to create a Video CD from a picture recorded on a tape (maximum length of about one hour).
bNotes
•Some models are not compatible for this operation. Regarding supported models, check to see if there is a listing for the Burn VCD feature in the index of the separate Camera Operations Guide.
•You can only use a USB cable for this operation. You cannot use an i.LINK cable.
•You cannot save pictures from a tape directly onto the hard disk drive of your computer.
1 Turn on the computer.
2 Prepare the power source for your camcorder, then slide the POWER switch repeatedly to select the PLAY/ EDIT mode.
Use the supplied AC Adaptor as the power source since it takes a few hours to create a Video CD.
The name of the power switch on the camcorder varies depending on the model.
3 Set [USB STREAM] in the menu settings of your camcorder to on.
The procedure of the menu settings varies depending on the model.
4 Insert a recorded cassette into your camcorder.
24Managing pictures on a Windows computer