Using the Remote

Changing button assignments

You can change the factory settings of the input buttons to suit the components in your system. For example, if you connect a DVD recorder to the VIDEO jacks on the receiver, you can set the VIDEO button on this remote to control the DVD recorder.

1 Hold down the input button of which you want to change the assignment.

Example: Hold down VIDEO.

2 Referring to the table below,

press the corresponding button for the category you want.

Example: Press 4.

Now you can use the VIDEO button to control the DVD recorder.

Categories and the corresponding buttons

Categories

Press

VCR (command mode VTR 3)a)

1

VCR (command mode VTR 2)a)

2

DVD player/DVD recorder

3

(command mode DVD1)b)

 

DVD recorder

4

(command mode DVD3)b)

 

CD player

5

 

 

Euro Digital Satellite Receiver

6

 

 

DVR (Digital CATV terminal)

7

 

 

DSS (Digital Satellite Receiver)

8

 

 

Blu-ray disc player

9

(command mode BD1)c)

 

Blu-ray disc recorder

0/10

(command mode BD3)c)

 

TV

-/--

 

 

Not assigned

ENTER/

 

MEMORY

a)Sony VCRs are operated with a VTR 2 or VTR 3 setting which corresponds to 8 mm and VHS respectively.

b)Sony DVD recorders are operated with a DVD1 or DVD3 setting. For details, refer to the operating instructions supplied with the DVD recorders.

c)For details on the BD1 or BD3 setting, refer to the operating instructions supplied with the Blu-ray disc player or Blu-ray disc recorder.

To clear all remote button assignments

Press ?/1, DMPORT and MASTER VOL – at the same time.

The remote is reset to its factory settings.

60GB