•The sound is output from the TV speaker only when a playback component and this receiver, as well as this receiver and the TV are connected via the HDMI jack. To output the sound from the speakers and to take advantage of the multi channel surround sound, be sure to
–connect the digital audio jacks on the playback component to the receiver.
–turn off TV’s volume or activate the TV’s muting function.
•The multi/stereo area audio signals of a Super Audio CD are not output.
•Video signals input to the HDMI IN jack can only be output from the HDMI OUT jack. The input video signals cannot be output from the VIDEO OUT jacks, or MONITOR OUT jacks.
•Check the setup of the connected component if an image is poor or the sound does not come out of a component connected via the HDMI cable.
•This receiver may not be able to transfer video or audio signals with certain types of components.
•Refer to the operating instructions of each component connected for details.
Notes
•Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will be transmitted.
•When connecting optical digital cords, insert the plugs straight in until they click into place.
•Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies.
18GB