When warning codes appear

During Auto Calibration, the warning code provides information on the measurement result. The warning code will appear on the display cyclically as follows:

Warning code t blank display t (warning code t blank display)b) t PUSH t blank display t ENTER

b)Appears when there are more than one warning code.

You can choose to ignore the warning code as the Auto Calibration function will automatically adjust the settings. You can also change the settings manually.

To change the settings manually

1Record down the warning code.

2Press .

3Press ?/1 to turn off the receiver.

4Follow the solution provided in the “Warning code and solution” below.

5Turn on the receiver and perform Auto Calibration again (page 27).

Warning code and solution

Warning Explanation and solution code

WARN. 40 The environment is noisy. Make sure the environment is quiet during Auto Calibration.

WARN. 60 The front speaker balance is out of range. Reposition your front speakers.c)

WARN. 62 The center speaker level is out of range. Reposition your center speaker.d)

WARN. 63 The surround left speaker level is out of range. Reposition your surround left speaker.d)

WARN. 64 The surround right speaker level is out of range. Reposition your surround right speaker.d)

WARN. 70 The front speaker distance is out of range. Reposition your front speakers.c)

Warning Explanation and solution code

WARN. 72 The center speaker distance is out of range. Reposition your center speaker.d)

WARN. 73 The surround left speaker distance is out of range. Reposition your surround left speaker.d)

WARN. 74 The surround right speaker distance is out of range. Reposition your surround right speaker.d)

c)For details, refer “Front speakers distance” (page 42).

d)For details, refer “Tip” on page 42.

Started Getting

29GB