STBY OFF: you cannot enjoy the S-AIR product while the subwoofer is in standby mode.

STBY ON: you can enjoy the S-AIR product while the subwoofer is in standby mode or turned on.

5 Press AMP MENU.

The AMP menu turns off.

Notes

When you set “S-AIR STBY” to “STBY ON,” power consumption during standby mode increases.

The sound of the S-AIR product may be cut off when the subwoofer is operated.

Using the IR repeater

About the IR REMOTE jacks

You can operate the subwoofer without pointing the remote toward the remote commander receiver if you connect an IR repeater (not supplied) to the IR REMOTE jack.

Use an IR repeater when you install the remote commander receiver in a place where signals from the remote cannot reach.

Bottom of the subwoofer

IR repeater (not supplied)

IR REMOTE

IR IN IR OUT1 IR OUT2

Remote

72GB