•The
No sound is heard from the
•If you use another
•Confirm the ID of the subwoofer and the
•Confirm the pairing setting (page 68).
•Install the
•Avoid use of equipment that generates electromagnetic energy, such as a microwave oven.
•Install the
•Stop using another wireless product.
•Change the “RF CHANGE” setting (page 71).
•Change the ID settings of the
•Turn off the system and
There is noise or the sound skips.
•If you use another
•Install the
•Avoid use of equipment that generates electromagnetic energy, such as a microwave oven.
•Install the
•Stop using another wireless product.
•Change the “RF CHANGE” setting (page 71).
•Change the ID settings of the
The remote does not function.
•Check that the subwoofer and the remote commander receiver are connected correctly and securely.
•Point the remote at the remote sensor ( ) on the remote commander receiver.
•Remove any obstacles in the path between the remote and the remote commander receiver.
•Replace both batteries in the remote with new ones, if they are weak.
•Press one of the input buttons (TV, BD, DVD, SAT, TUNER/BAND, or DMPORT) on the remote to select the component you want to operate (page 50).
The volume turns down when the output method changes from the TV speaker to the system speaker.
•The Volume Limit function is working. For details, see “Using the Volume Limit function” (page 44).
If the system still does not operate properly after performing the above measures, reset the system as follows:
Use buttons on the subwoofer for the operation.
1 Press ?/1 to turn on the power.2 Press INPUT SELECTOR, VOLUME“COLD RESET” appears and the system is reset. AMP menu, sound field, etc., return to the default settings.
Information Additional