Performing the Auto
Calibration
| THEATRE | TV ?/1 | ?/1 | |
| AV ?/1 | |||
| ?/1 | |||
|
|
|
| |
|
|
| SYSTEM STANDBY | |
| TV | BD | DVD | SAT |
| SOUND FIELD |
|
| Input |
| VIDEO TUNER/BAND DMPORT | |||
|
|
|
| buttons |
| BD/DVD | F1 | F2 | |
| TOP MENU | MENU | ||
| ANALOG | DIGITAL | A/B |
|
| 1 | 2 | 3 |
|
| 4 | 5 | 6 | TONE |
| NIGHT | |||
|
|
|
| |
| 7 | 8 | 9 | MODE |
| AMP | |||
|
|
|
| |
|
| 0 |
| AMP MENU |
| CLEAR | ENTER | MENU | |
| DISPLAY | TOOLS/ |
| |
| OPTIONS |
| ||
|
| F |
|
|
C, X, x, c, | G |
| g |
|
|
| f |
|
|
| RETURN/EXIT MENU/HOME | |||
| TV CH - |
|
| TV CH + |
| PRESET - |
|
| PRESET + |
| . | < | < | > |
| TUNING - |
|
| TUNING + |
| m | H |
| M |
TV
X x
1 Press ?/1.The system turns on.
2 Press AMP MENU.Point the remote at the remote sensor () on the remote commander receiver.
Remote sensor
Remote commander receiver
3 Press x/X repeatedly until “A. CALMENU” appears on the top panel display, then press or c.The Auto Calibration starts after the countdown.
The measurement process will take approximately 30 seconds to complete. The table below shows the display when measurement starts.
Measurement for | Display |
Speaker existance | TONE |
|
|
Speaker gain, distance, frequency | T.S.P. |
response |
|
|
|
Subwoofer gain and distance | SUBWOOFER |
|
|
Notes
•If “PHONES” appears, you cannot perform the Auto Calibration. Disconnect the headphones from the S- AIR product you are using, then restart the Auto Calibration.
•If “CHECK MIC” appears, you cannot perform the Auto Calibration. Connect the calibration mic, then restart the Auto Calibration.
•When the Auto Calibration starts:
–Stand some distance from the speakers and the listening position to avoid measurement failure. This is because test signals are output from the speakers during measurement.
–Avoid making noise to get a more accurate measurement.
To cancel the Auto CalibrationThe Auto Calibration function will be canceled when you do the following during the measurement process:
–Press .
–Press input buttons on the remote or INPUT SELECTOR on the subwoofer.
–Change the volume level.