Russound CAM6.6X-S1/S2 instruction manual UNO-S1 Keypad-CAT-5 Connection

INSTALLER

COMPONENT GUIDE

UNO-S1 Keypad-CAT-5 Connection

	NEWMARKET, NH U.S.A.
			UNO-S1
INMADEKOREA	System Control Keypad
	BL/W	BL	OR/W	OR	GR/W	GR	BR/W	BR
								1
DESIGNED IN USA	COM B	COM A	IR OUT	GND	STATUS IN	GND	+12V	+12V

1110 PUNCHDOWN CONNECTOR - Termination for CAT-5 connection between the UNO-S1 Keypad and the CAM6.6 controller.

CAT-5 Connection

The UNO-S1 Keypad uses a 110-punchdown termi- nal to provide a simple installation and strong connec- tion for CAT-5 cable’s eight conductors. Punchdown terminals require the use of a punchdown tool which has been provided with the keypad kit. Attach the CAT-5 cable to the 110-punchdown terminal on the UNO-S1 Keypad as shown, matching the conductor colors to the connection color guide. The keypad will not operate properly if the terminations deviate from the required connection order.

Caution:

Take care when using an impact 110 punchdown tool, as this may overspread the contact points. Use of the impact tool may propel stray bits of wire and jacket into the keypad’s chassis and possibly cause a short in the circuitry. Gently shake or blow air through the keypad chassis to remove stray wire before the keypad is installed into the junction box.

31