INSTALLER
INSTALLATION MENU
The following items make up the Installation Menu:
PERIPH SETUP (PerSu) 
SOURCE SETUP (SrcSu) 
ZONE SETUP (ZonSu) 
CTRLR SETUP (CtlSu) 
POWER MGT (PwMgt) 
LEARN IR (LrnIR) 
MACRO EDITOR (MacEd) 
SYSTEM INFO (SInfo) 
PERIPH SETUP (PerSu)
Peripheral Setup allows the CAM6.6’s optional internal source to be configured.
The following items can be found in the PERIPH SETUP menu:
MEM NAME (MemNm) 
BANK NAME (BnkNm) 
CONTROLLR ID (CtlId) 
DIAGNOS- TICS (Diags) 
FACTORY INIT (FInit) 
SYSTEM INFO (SInfo) 
MEM NAME (MemNm)
NOTE: A memory preset must be created and saved before it can be named. Once it is saved, the preset’s Tuner #, Bank # and Memory # must be entered in the following procedure.
This procedure accesses a name entry field to enter a custom name for a memory preset. See
Periph Setup - Flow Chart page 67
1. BANK # –Select the BANK # of the memory preset. (Bank#)
2. | MEMORY # – | Select the MEMORY # of the preset to be named. |
| (Mem #) |
|
3. | MEMORY NAME – | Use the up/down keys to select a character and left/right keys |
| (MemNm) | to change a character position. A blinking cursor indicates the |
|
| placement of the character being entered. Names can be from 1 |
|
| to 12 characters in length. |
BANK NAME (BnkNm)
This procedure accesses a name entry field to enter a custom name for each of the tuner’s six banks. See Periph Setup - Flow Chart page 67
1. BANK # – | Select the BANK # of the memory preset. |
(Bank#) |
|
53
