UNO-S2 Keypad Control of Tuner
Selecting the tuner
On the 
to select the XM Tuner by choosing the tuner’s preassigned source number (1).
Selecting a Mode
Push 
to toggle between XM modes.
Exiting a Mode
Press 
to exit XM mode selection menu.
Selecting the desired channel
Use 
and 
for manual channel selection. The channel will appear on the keypad. To move quickly through the channels, press and hold
either 
or 
for more than 1.5 seconds.
Signal Strength Mode
To check XM signal strength, press and hold
USER
INTERNAL SOURCE - XM TUNER
UNO-S2 Keypad Control
then release. The display shows the signal
strength rating. To exit, press 
again.
Selecting a Bank
To select a bank, press and hold 
for bank
up or 
for bank down. The bank’s name will be temporarily displayed on the
Recalling a Memory Preset
Press 
and 
to scroll through the memo- ry presets for the selected bank. This procedure will step through all of the presets in the current bank, then loop back to start at the first one.
Only configured presets will be displayed.
Mute
Press 
to mute/unmute the tuner audio output.
21
