INSTALLER
INSTALLATION MENU
9. SAVE CHANGES? – | Select “yes” to save changes. Procedure advances to ZONE NUM |
(Save?) | (step 1) |
SOURCE NAMES (SrcNm)
This procedure allows the installer to customize the source names for the sources attached to the CAM6.6. See Source Names/Vol Trim - Flow Chart page 71
1. SOURCE NUM –Select the source number this name will be assigned to. (Src #)
2. SOURCE NAME – | Select the name. SOURCE NUM will reappear on the LCD panel; |
(Name) | repeat the instructions for each source to be labeled. |
SRC VOL TRIM (SrcVT)
This procedure allows the installer to adjust the output level of an individual source. The output vol- ume is adjustable by 16dB. At 0dB
Chart page 71
1. SOURCE NUM –Select the source number this level will be set for. (Src #)
2. TRIM LEVEL – | 0 dB is max output volume, |
(Trim) |
|
NUMERIC IR (NumIR)
Numeric IR allows the installer to program source specific number functions (Channel 12, Disk 89, etc.).
See Numeric IR - Flow Chart page 72
1. SOURCE NUM – | Select the source number this function will be configured for. |
(Src #) |
|
2.USE NUM IR? – (NumIR)
Tells the system whether the source component has numeric scrolling, such as
3. HIGHEST NUM – | Enter the highest possible number; for example, the |
(High#) | player would have a max number of 100. |
58