Russound CAM6.6X-S1/S2 Numeric Text, Prefix Cmd, a. Selected: Learned IR, Suffix Cmd, Installer

	INSTALLER
	INSTALLATION MENU
4. NUMERIC TEXT –	Select Numeric descriptive text.
(NmTxt)
5. PREFIX CMD –	Tells the system whether a command will be issued prior to the
(Prefx)	selection of the numerical value (e.g., Disc 1,2). If “no,”
	procedure advances to SUFFIX CMD (step 9)
6. COMMAND TYPE –	Select the type of command (e.g., CD, TV, etc.).
(CmdTp)
a. Selected: Learned IR	Choose Learned IR if the pre-programmed IR code library does
(LrnIR)	not support the source component.
i. LEARNED SRC –	Select the learned source bank to be assigned to the source
(LnSrc)	component. Procedure advances to KEY FUNCTION (step 8)
b. Selected: Unassigned	The numeric IR Prefix command is cleared. Procedure advances
(Unasg)	to SUFFIX CMD (step 9)
c. Selected: Default	Default selects the same device type and device code previously
(Deflt)	setup in BASIC SETUP. Procedure advances to KEY FUNCTION
	(step 8)
d. Selected: Macro:	(To build macros, see Macro Editor page 65)
i. MACRO -	Macro loads a series of commands which are processed when
(Macro)	activated.
ii. MACRO ID –	Enter the macro ID number. Menu advances to SUFFIX CMD (step 9)
(MacID)
e. All Other Selections:	Procedure advances to DEVICE CODE (step 7)
7. DEVICE CODE –	Source component code for IR control.
(DevCd)
8. KEY FUNCTION –	Select a function (Disc, etc.).
(KeyFn)
9. SUFFIX CMD –	Tells the system whether a command will be issued after the
(Sufix)	selection of the numerical value (e.g., 1, 2 Enter). If “no,” proce-
	dure advances to SAVE CHANGES (step 13)
10. COMMAND TYPE –	Select the type of source command (e.g., CD, TV, etc.).
(CmdTp)
a. Selected: Learned IR	Choose Learned IR if the pre-programmed IR code library does
(LrnIR)	not support the source component.

59