Russound CAM6.6X-S1/S2 instruction manual Recall Last Channel, Setting a Memory Preset

UNO-LRC1 Remote Control of Tuner

Selecting the tuner

To select the XM tuner, push and choose the source number preassigned to the XM Tuner (1), or use the UNO numeric source inputs at the bottom of the UNO-LRC1.

Selecting a Mode

Push , or to toggle between XM operating modes.

Exiting a Mode

Press or to exit XM operating mode menu.

Signal Strength mode

Press and hold and release. The display shows the signal strength rating. To exit press .

Selecting the desired channel

Use the Channel and or and for manual tuning. To move quickly

through the channels, press and hold the button for more than 1.5 seconds. To directly select a channel, enter the one-, two- or three-digit chan- nel.

Recall Last Channel

Press the button to recall the last channel selected.

USER

INTERNAL SOURCE - XM TUNER

UNO-LRC1 Remote Control

Selecting a Bank

To select a bank, press and hold for bank

up or for bank down.

Setting a Memory Preset

To set a memory preset, tune to the desired channel, then press and hold the appropriate number key (1-6) for the preset. When the mem- ory preset is saved, the appropriate preset num- ber (M1 through M6) and SAVED will be tem- porarily displayed on the UNO-S2.

Recalling a Memory Preset

Press and to scroll through a loop of all the memory presets for the currently selected bank. Only configured presets will be displayed.

Mute

Press the button to mute/unmute the tuner audio output.

23