SAMPLE CONFIGURATIONS
MULTIPLE CONTROLLERS WITH ST2 DUAL TUNER
Sharing an ST2 Dual Tuner with multiple CAM6.6 con- trollers (no
This configuration is suitable for 7 to 12 zones that can all access the ST2 Dual Tuner. This configuration uses RCA “Y” cables from the ST2 Tuner source out- puts to connect to both CAM6.6 source inputs.
CAM6.6 (no tuner installed) - Controller Setup Menu: Controller ID = 1 Source Setup Menu: Basic Setup Procedure: Source # = 1; Source Name = Tuner 1; Command Type = Peripheral
Source # = 2; Source Name = Tuner 2; Command Type = Peripheral Output/Input Switch = Input
RCA cable connected from ST2 Tuner 1 audio output
to Source 1 input on CAM6.6 (1)
RCA cable connected from ST2 Tuner 2 audio output to Source 2 input on CAM6.6 (1)
CAM6.6 (no tuner installed) - Controller Setup Menu: Controller ID = 2 Source Setup Menu: Basic Setup Procedure: Source # = 1; Source Name = Tuner 1; Command Type = Peripheral
Source # = 2; Source Name = Tuner 2; Command Type = Peripheral Output/Input Switch = Input
RCA cable connected from ST2 Tuner 1 audio output to Source 1 input on CAM6.6 (1)
RCA cable connected from ST2 Tuner 2 audio output to Source 2 input on CAM6.6 (2)
NEWMARKET, NH U.S.A. | ST2 Smart Tuner |
| LOOP |
|
| TUNER 2 |
|
|
| TUNER 1 | Serial# | |
FM COAX | ANTENNA |
| AUDIO OUTPUT |
|
| AUDIO OUTPUT |
| |||||
| LINK | KEYPAD PORTS |
| IR | L | R | ANTENNA | IR | L | R | 12VDC 1.5A | |
|
| INTERFACE |
|
|
|
|
|
| ||||
IN | OUT |
|
|
|
|
|
|
|
|
|
| IN KOREA |
|
|
|
|
|
|
|
|
|
| MADE |
RCA “Y” Cable
102.5102.5
RCA Cable | RCA Cable |
CAM6.6
CAM6.6 Back Panel
(Controller ID 1)
CNBCCNBC
CAM6.6
CAM6.6 Back Panel (Controller ID 2)
110