INSTALLER
INSTALLATION MENU
KEY CONFIG (KeyCf)
Key Configuration defines
1. ZONE NUM – (Zone#)
2.SOURCE NUM – (Src #)
3.SELECT A KEY – (SelKy)
4.KEY TYPE – (KeyTp)
Using or , select the keypad key to be configured.
Either “Key Press,” “Key Hold” or “Both” will activate the command.
5. KEY NAME – | Name that appears on the keypad display when the command is |
(KeyNm) | activated. |
6. COMMAND TYPE – | Select the type of source command (e.g., CD, TV, etc.). |
(CmdTp) |
|
a. Selected: Learned IR – Choose Learned IR if the | |
(LrnIR) | not support the source component. |
i. LEARNED SRC – | Select the learned source bank to be assigned to the source |
(LnSrc) | component. Procedure advances to KEY FUNCTION (step 8) |
b. Selected: Unassigned | The key configuration is cleared. Procedure advances to SAVE |
(Unasg) | CHANGES (step 9) |
c. Selected: Default | Default selects the same device type and device code previously |
(Deflt) | setup in BASIC SETUP. Procedure advances to KEY FUNCTION |
| (step 8) |
d. Selected: Macro: | (To build macros, see Macro Editor page 65) |
i. MACRO - | Macro loads a series of commands which are processed when |
(Macro) | activated. |
ii. MACRO ID – | Enter the macro ID number. Menu advances to SAVE CHANGES |
(MacID) | (step 9) |
e. All Other Selections: | Procedure advances to DEVICE CODE (step 7) |
7. DEVICE CODE – | Enter source component code number listed in this manual’s |
(DevCd) | Reference section. |
8. KEY FUNCTION – | Select a function for the button. |
(KeyFn) | 57 |