Russound CAM6.6X-S1/S2 instruction manual Optional Internal Source XM Tuner Antennas, XM Antenna

INSTALLER

MAKING CONNECTIONS

Optional Internal Source - XM Tuner Antennas

XM Antenna

Connect the included XM antenna for XM recep- tion to the back panel of the XM module. The antenna comes with 20 feet of cable. If this length is not sufficient, there are aftermarket antenna kits available for custom lengths. Position the antenna near a south-facing window to receive the best signal from a satellite or ter- restrial signal.

The antenna may also be attached to an exter- nal wall by sliding the slots on the back of the antenna onto four screws mounted on an exteri- or wall. Establish the best receiving position for the antenna before attaching it to the wall.

XM Signal Strength Mode

To test the XM reception, turn the unit on. When the XM radio is powered for the first time, the XM service will start playing XM Channel 1, a preview/promotional channel. Verify that Channel 1 is playing by viewing the channel number on the keypad display. Enter Signal Strength Mode by pressing and holding the Stop button on the UNO-S2 keypad. The display shows one of the following:

GOOD SIGNAL Signal strength good MARGINAL SIG Signal strength marginal

POOR SIGNAL	Signal strength poor
NO SIGNAL	Loss of signal

Adjust the antenna until GOOD SIGNAL is dis- played. Press Stop to exit Signal Strength Mode.

CAM6.6

45