Russound CAM6.6X-S1/S2 Wiring Instructions, Keypad Wiring, CAT-5WIRE COLOR, Type, Speaker Wiring

INSTALLER

WIRING INSTRUCTIONS

CAUTION

Do not connect the controller's main power feed until all other connections have been made and verified. Live connection or removal of the keypad wiring or other wiring when the system is powered can cause communication problems in the network. Double-check terminations during each phase of the installation to prevent accidental damage. Incorrect wiring is the number one cause for non-warranty product damage.

Keypad Wiring

For the UNO-S2 and UNO-S1 keypad, the follow- ing connections are used to terminate the CAT-5 wire to the 110 punchdown on the keypad:

CAT-5 WIRE COLOR TYPE

Brown . . . . . . . . . . . . . . . . . . . +12V

Brown/White . . . . . . . . . . . . . . +12V

Green . . . . . . . . . . . . . . . . . . Ground

Green/White . . . . . . . . . . . . Status In

Orange . . . . . . . . . . . . . . . . . Ground

Orange/White . . . . . . . . . . . . . IR Out

Blue . . . . . . . . . . . . . . . . . . . COM A

Blue/White . . . . . . . . . . . . . . COM B

•To determine the amount of CAT-5 wire required for the system installation, first decide how many keypads will be used, then determine the distance between each intend- ed keypad location to the intended CAM6.6 location. The maximum recommended wire run length is 250 feet for each UNO Keypad.

RJ-45 Connections

The CAT-5 T568A wiring standard shown on the right is used for the RJ-45 terminations.

•Make sure that the entire wire path between keypads and CAM6.6 is clear and not obstructed by a floor ceiling joist, or masonry wall which can’t be drilled through.

•Confirm ahead of time that you can drill an outlet hole easily and in an unobtrusive spot to connect wires with the CAM6.6.

•Label wires with keypad and room location. This simplifies CAM6.6 hook-up once the key- pads and speakers are installed.

Speaker Wiring

•Standard 16-gauge 4-conductor stranded speaker wire can be run up to to 125 feet; 14-gauge wire can be run up to 250 feet.

•When running wire, avoid locations conceal- ing pipes, heating ducts and AC wiring in the general vicinity.

•Avoid running wires close to house electri- cal wiring for any distance. If you have to run them parallel, make sure to space the wires at least two feet from the AC line.

27