Russound CAM6.6X-S1/S2 instruction manual 12VDC Mute Trigger In/Out, 12VDC Mute Trigger Out

INSTALLER

MAKING CONNECTIONS

12VDC Mute Trigger In/Out

12VDC Mute Trigger In

When 12VDC is applied to the Mute Trigger In, the system will fully mute any source connected to the Source Audio Input. The connections for the trigger are made using a two-conductor cable with 1/8” male mini-plug jacks. The tip is positive

(+)and sleeve is negative (-). This allows for the connection of an external or muting device. The CAM6.6 can be programmed to mute audio for one or all zones as preferred when the 12VDC is applied.

12VDC Mute Trigger Out

Mute Trigger Out 12VDC output is used for trig- gering an external amplifier, muting device or other component dependent on the Mute Trigger In 12VDC. The connections for the output are made using a two-conductor cable with 1/8” male mini-plug jacks at each end. The tip is posi- tive (+) and sleeve is negative (-). The default setting for the Mute Trigger Out provides 12VDC whenever 12VDC is applied to the Mute Trigger In.

ANTENNA CAM6.6

Doorbell Interface

42