Preset Setting Tool Display Screen
An overview of the functions of the GUI displayed when the Preset Setting Tool starts up is shown
below.
1 
2 
3
6
4
5
7
8
9
10
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14 |
| 13 |
| 12 |
| 11 | ||||
|
|
|
|
|
|
|
|
|
|
|
1Load Settings button
Loads the current preset settings currently set in the VB150.
2Save Settings button
Saves to the VB150 the preset settings that were sent by clicking the Apply button. After setting the presets, be sure to click the Save Settings button to save the settings to the VB150.
3Stop Communication button
This button can be clicked during communication with the VB150 to cut the connection.
4
VB Administration Tools
4
Preset Selection box Select the preset to be set.
5For picture recording only
Select whether the preset settings can be used by the viewer. When this is checked, presets are used for picture recording only; when it is not checked, presets can be used not only for picture recording but for the viewer as well.
6Panorama Preview
Displays the panorama picture of the camera currently selected with this tool. The Preset Preview frame (yellow) which reproduces the preset values is displayed on the panorama picture. The preset settings can be made by dragging this frame to move it or change its shape, or clicking on the panorama picture.
Also, when a view restriction is set for a currently selected camera, the view restriction frame is displayed on the panorama picture in blue or red. If the frame is red, this indicates that the entered preset values are outside the view restriction.
76
