Admin Viewer
Clicking the screen to control the camera
You can control the pan, tilt and zoom operations by clicking and holding the mouse in the viewer to start and releasing the mouse to stop.
To Make Settings...
1
Choose Setup Properties from the View menu.
2
3
When the Setup Properties dialog box appears, click the Camera Control tab.
Check to be sure the "Use the arrow buttons to control the camera when connected to a VB150 or newer model" check box is selected, then click OK.
Set the mouse cursor over the viewer. There are eight arrows, such as the up arrow at the top of the screen and the down arrow at the bottom of the screen, for making changes with the mouse cursor. There are also two central buttons, plus on the left and minus on the right, for making changes with the mouse cursor. In each case, click and hold to enable pan, tilt and zoom operations.
4
VB Administration Tools
96
