Restoring the Factory Default Settings
There are 2 ways to restore the factory default settings on the VB150, as described below. When you restore the factory default settings, the procedure in “Initializing settings other than system/ network settings” resets all the settings except the system settings (→ P.35) and the network settings (→ P.36). The procedure in “Initializing all settings” resets all the settings to their factory default values.
Initializing settings other than system/network settings
Launch the Web browser to access the VB150 Settings Title Page (→ P.34) and open the Administration Tools Settings Page (→ P.57). Click the Restore button to restore all the factory default settings, except for the System (→ P.35) and Network (→ P.36) settings. Note that once this button is clicked, the VB150 will restart automatically to restore the settings so that you cannot cancel the process.
This button can be used when the VB150 is accessible via the network. Use this button when you want to restore the settings other than the System and Network settings.
Initializing all settings
Factory Defaults Reset switch
Dc In 13V |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
| A | B | A | B | RS232C |
|
| Video In |
|
|
|
|
|
| CC1 | CC2 | V1 | V2 |
| |
|
|
|
|
|
|
| V3 | V4 | ||
|
|
|
|
|
|
|
|
| ||
1 | 2 | 1 |
|
| 2 |
|
|
|
|
|
| In |
| Out | Ethernet |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| 100/10BT |
|
|
|
|
|
VB150 rear panel
Unplug the AC adapter to turn the VB150 off. Use a pointed object such as the end of a paper clip to press the Factory Defaults Reset switch and then plug the AC adapter to turn the VB150 on. Be sure to hold down the Factory Defaults Reset switch for at least 5 seconds after the power is turned on. All VB150 settings will return to the factory default values, but the content of Web pages used for distributing videos that is saved on the VB150 will remain as is. Note that once the process is executed, it cannot be canceled.
Use the Factory Defaults Reset switch when you have forgotten the password or IP address and that you cannot access the VB150 via the network.
c | ● Be sure to make a note of the current settings before you restore the |
factory default settings using the Restore button (→ P.109). | |
Note | ● Once the Factory Defaults Reset switch is pressed, the VB150’s network- |
| |
| related settings, such as the IP address, subnet mask, and default gateway |
| address will return to their factory default values, making it impossible to |
| operate the VB150 from a PC connected to it. In this event, reset the IP |
| address for your environment (→ P.29). |
Appendix
108
