3
4
The VB150s connected to the network are automatically detected and their MAC address, the currently set IP address and
Click to select | the model name are displayed. The factory |
| |
| default settings for the IP address is |
| 192.168.100.1. |
| The MAC address for the VB150 can be |
| found on the warranty card or on the seal |
| attached on the bottom of the unit. |
| Note that VBSetup.exe cannot be used |
| across segments. |
| If a multiple number of VB150s are |
| connected to the network, all of them are |
| displayed. Select a MAC address to be |
| used for initial setup by clicking on it, then |
| click the “Initial Setup...” button. |
When the “Initial Setup” dialog box appears, enter the user name and password set as the factory defaults.
User Name : root
Password : VB150
Then enter the IP address and subnet mask you want to set for the VB150. If you want to specify a default gateway address, enable the [Set the default route to Ethernet] check box and then enter the default gateway address. Although the time zone and video signal can also be specified here, there is basically no need to change the time zone setting. Then click the OK button.
29
