Detail Settings
Administration Tools Settings Page
Miscellaneous
"View Current Settings"
Displays a list of current settings.
"Reboot"
Reboots the VB150.
"Restore Settings"
All but the System settings and Network settings will be restored to the factory default settings. Click "Restore"- "OK" buttons and the VB150 will be rebooted automatically.
On-board File System Information
The
Slot A/B
If a PC card, used for communications and storage, is inserted into the slot, the "Manufacturer" and "Product Information" is displayed. Depending on the card type and its status, the operation buttons are displayed and the card status can be controlled. The card slots are labelled A and B from the bottom upwards (→ P.22).
Recorded Picture Information and Manipulation
This section displays the status of recorded picture processing and the number of recorded pictures. The maximum number of pictures that can be recorded is 30,000. Under certain circumstances, the "Rebuild" button for "Rebuilding of recorded picture list" and the "Delete" button for "Deletion of recorded pictures" may be displayed, and if the pictures cannot be recorded the reason will be displayed.
"Rebuilding of recorded picture list" Normally, there is no need to reconstruct the picture list. Click "Rebuild" button if you have removed a memory card and modified the content of that memory card (erased files, etc.) on another PC.
"Deletion of recorded pictures"
Deletes pictures recorded on a card. Specify the delete criteria below and then click the "Delete" button.
"Time"
Select the period of time following the recording of the pictures after which the pictures are deleted.
"Event"
Select whether the pictures to be deleted are those where recording was performed in response to inputs from an external device, according to a schedule or motion detection.
"Camera"
Select camera by which the pictures were recorded.
You can also select a combination of Time, Event and Camera.
e
Tip
●We recommend that you make a note of current server settings before you restore the default settings in "Restore Settings" (→ P.109).
●While the factory defaults reset switch can also be used to restore the factory default settings, note that this resets all the settings (→ P.108).
57
Click the [Cancel] button to exit from this page. This returns you to the
settings title page.
