Sony 3-299-549-12(1) 105GB, Operation, Information Additional

Symptom	Remedy
No sound or only a very low-level	• Check the speaker connections and settings (pages 23, 96).
sound is heard from the surround	• Check the “DEC. MODE” setting (page 63).
speakers.	• Depending on the source, the effect of the surround speakers may be less
	noticeable.
	• Wireless setting of the speaker is not correct.
	• A 2 channel source is being played.

The beginning of the sound is cut off. • Set the Sound mode to other than “AUTO” (page 65).

• Set the decoding mode to other than “A.F.D. MULTI” (page 63).

No sound is heard or sound is cut off. • The S-AIR main unit and/or the surround amplifier is installed in a place such as on a metal shelf.

•Wireless LANs, a microwave (oven) and Bluetooth applications, etc. are placed near the surround amplifier.

•Move away the other components from the surround amplifier or turn off the other components.

Operation

Symptom	Remedy
Radio stations cannot be tuned in.	• Check that the antenna (aerial) is connected securely. Adjust the antenna
	(aerial) or connect an external antenna (aerial) if necessary.
	• The signal strength of the stations is too weak (when tuning in with
	automatic tuning). Use direct tuning.
	• No stations have been preset or the preset stations have been cleared
	(when tuning by scanning preset stations). Preset the stations (page 67).
	• Press DISPLAY so that the frequency appears in the front panel display.
The remote does not function.	• There are obstacles between the remote and the control unit.
	• The distance between the remote and the control unit is too far.
	• The remote is not pointed at the remote sensor on the control unit.
	• The batteries in the remote are weak.
A disc does not play.	• There is no disc inserted.
	• The disc is upside down.
	Insert the disc with the playback side facing down.
	• The system cannot play CD-ROMs, etc. (page 7).
	• The region code on the DVD does not match the system.
	• Moisture has condensed inside the control unit and may cause damage to
	the lenses. Remove the disc and leave the control unit turned on for about
	half an hour.
	• The disc is not written properly.
	• The disc is dirty or flawed.

Information Additional

continued

105GB