Sony 3-299-549-12(1) 92GB, DVD-RWonly), x[4:3 OUTPUT], 1 Select [ON], then press, 3 Press C/c to select [YES], 2 Press C/c to select [START], x[PROGRESSIVE (COMPONENT OUT)]

Note

•Depending on the DVD, [4:3 LETTER BOX] may be selected automatically instead of [4:3 PAN SCAN] or vice versa.

x[PROGRESSIVE (COMPONENT OUT)]

You can set the progressive signal that is output from the COMPONENT VIDEO OUT jacks to on/off. For details, see “Does your TV accept progressive signals?” (page 37).

[ON]	The system outputs interlace
	signals.
[OFF]	The system outputs progressive
	signals. When you select [ON],
	follow the steps below.

1 Select [ON], then press .

The confirmation display appears.

2 Press C/c to select [START].

The system outputs the progressive signal for 5 seconds. Check that the screen is displayed correctly.

3 Press C/c to select [YES].

The system outputs the progressive signal. If you select [NO], the system will not output the progressive signal.

Note

•[PROGRESSIVE (COMPONENT OUT)] is effective only when you connect the control unit and TV with a component video cord (page 27).

x[4:3 OUTPUT]

When you use a 16:9 aspect ratio TV, you can adjust the aspect ratio to watch 4:3 aspect ratio signals. If you can change the aspect ratio on your TV, change the setting on your TV, not the system.

[FULL]	Select this when you can change
	the aspect ratio on your TV.
[NORMAL]	Select this when you cannot
	change the aspect ratio on your
	TV. A 16:9 aspect ratio signal
	with black bands on left and right
	sides of the image appears.

16:9 aspect ratio TV

Note

•[4:3 OUTPUT] is effective only when you set [TV TYPE] in [VIDEO SETUP] to [16:9].

x[PAUSE MODE] (DVD VIDEO/DVD-R/DVD-RW only)

You can select the picture in pause mode.

[AUTO]	The picture, including subjects
	that move dynamically, is output
	with no jitter.
[FRAME]	The picture, including subjects
	that do not move dynamically, is
	output in high resolution.

92GB