3Inserting the wireless transmitter/transceiver

You can transmit sound from the S-AIR main unit to an S-AIR product, such as a surround amplifier or S-AIR receiver.

An S-AIR product is a component that is compatible with the S-AIR function.

To use the S-AIR function, you need to insert the wireless transmitter/transceiver into the subwoofer, surround amplifier and S-AIR receiver.

For details of the S-AIR function, see “Using an S-AIR Product” (page 74).

Note

•When you insert the wireless transmitter/transceiver, make sure that the AC power cord (mains lead) is not connected to a wall outlet (mains).

•Do not touch the terminals of the wireless transmitter/transceiver.

•Insert the wireless transmitter/transceiver with the S-AIR logo facing up.

•Insert the wireless transmitter/transceiver so that the V marks are aligned.

•Do not insert other than the wireless transceiver into the EZW-RT10 slot.

•Do not insert other than the wireless transmitter into the EZW-T100 slot.

To insert the wireless transmitter into the S-AIR main unit (subwoofer)1 Remove the screws and detach the slot cover.

Rear of the subwoofer

Slot cover

Note

•Remove the screws from the slot cover bearing the caution mark. Do not remove other screws.

•The slot cover is no longer necessary; however, keep it after detaching.

2 Insert the wireless transmitter.

Rear of the subwoofer

continued

Started Getting

25GB