Press DIVIDE during recording.
“DIVIDE” flashes and the new message number is added at the point you pressed the button. The message will be recorded as two messages, however recording continues without stopping.
Message 1 | Message 2 | Message 3 |
Message is divided.
Message 2 and Message 3 are recorded without stopping.
Tip
You can divide the currently recorded message during recording pause.
Notes
You need a certain amount of free space in the memory to divide a message. For more information, see “System Limitations” on page 67.
If 99 messages have been recorded in a folder, you cannot divide a message in that folder.
Once a message is divided, you cannot re- combine the divided messages.
You cannot divide a message at the very beginning (0.5 seconds from the beginning) of the message.
When you divide a message into two, at the point of division, the end of the first message and the beginning of the second message may be interrupted.
If you divide messages too frequently while the IC recorder is recording them, the following phenomenon may occur: The operation indicator keeps flashing, and you cannot operate the IC recorder for a certain period. This is not a malfunction. Wait until the operation indicator goes off.
Recording
27GB