Symptom | Remedy |
|
|
| |
The operation indicator | “LED” is set to “OFF” (page 61). Display the menu and set “LED” | |
does not light. | to “ON.” |
|
“FULL” is displayed and you | The memory is full. Erase some of the messages (page 47). | |
cannot start recording. |
|
|
|
| |
“FULL” is displayed and | 99 messages have been recorded in the selected folder or | |
you cannot operate the IC | 495 messages (when there are 5 folders) in total have been | |
recorder. | recorded. Therefore you cannot record another message, or | |
| move a message. Select another folder (page 23), or erase | |
| some of the messages (page 47). |
|
|
| |
Recording is interrupted. | The VOR function (page 25) is activated. Set “VOR” to “OFF” in | |
| the menu (page 58). |
|
Noise is heard. | An object, such as your finger, etc., accidentally rubbed or | |
| scratched the IC recorder during recording so that noise was | |
| recorded. |
|
| The IC recorder was placed near an AC power source, a | |
| fluorescent lamp or a mobile phone during recording or | |
| playback. |
|
| Plug of the connected microphone was dirty when recording. | |
| Clean the plug. |
|
| The (headphones) plug is dirty. Clean the plug. | |
| Noise may be heard during VOR recording. | |
| Noise may also be heard at the point where you add a | |
| recording or overwrite a recording. |
|
Recording level is low. | “SENS” (microphone sensitivity) is set to “ | .” |
| Display the menu and set “SENS” to “ | ” (page 24). |
|
|
|
Troubleshooting
63GB