1 Press DIVIDE while you are playing back the message you want to divide.
The current message number and “DIVIDE” flash.
2 Press DIVIDE.
A new number is added to the newer part of the divided message, and the message numbers of the following messages will be incremeted by one.
Message 1 |
| Message 2 | Message 3 |
| ||
|
|
|
|
|
| |
| A Message is divided. |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Message 1 | Message 2 | Message 3 | Message 4 |
| ||
The message numbers are incremeted.
To cancel dividing the messagePress (stop) before step 1.
Notes
You need a certain amount of free space in the memory to divide a message. For more information, see “System Limitations” on page 67.
If 99 messages have been recorded in a folder, you cannot divide a message. In that case, reduce the number of messages to 98 or less by erasing unwanted messages or by moving some of the messages to another folder before dividing a message.
When you divide a message with a title and artist name, the newer part has the same title, artist name, and file name.
Once a message is divided, you cannot combine divided messages using the IC recorder.
If you divide a message frequently, the unit may become unable to divide the message further.
If you divide a message with an alarm setting, the same alarm setting remains only with the former message divided.
You cannot divide a message at the very beginning (0.5 seconds from the beginning) or at the very end (0.5 seconds prior to the end) of the message.
If you divide a message during
If more than 10 seconds have passed after step 1, you must start the procedure again from the beginning.
52GB