When the set date and time comes

At the set time, the alarm will sound for about 10 seconds and the selected message will be played back. (If you have selected “B-ONLY,” only the alarm will sound.)

During playback, “ALARM” will flash in the display window.

When the playback ends, the IC recorder will stop automatically at the beginning of that message.

To listen to the same message again

Press PLAY/STOP•ENTER, and the same message will be played back from the beginning.

To stop the alarm before the playback starts

Press (stop) while the alarm sound is heard. You can stop the alarm playback even when the HOLD function is activated.

To change the alarm setting

Start from step 2 on page 43.

To cancel the alarm setting

Follow steps 1 and 2-on page 44. In step 2-, press –or + to select “OFF,” and press PLAY/STOP•ENTER. The alarm will be cancelled, and the alarm indicator will disappear from the display window.

Playback

45GB