
Symptom | Remedy |
|
|
It takes a long time for the | If the IC recorder is required to process a large amount of |
IC recorder to start. | data, it may take longer for the IC recorder to start. This is not |
| a malfunction of the IC recorder. Wait until the |
| disappears. |
The IC recorder does not | Take out the batteries and insert them again (page 11). |
operate correctly. |
|
Please note that recorded messages may be erased during service or repair work.
Error messages
Error message | Cause/Remedy | |
LO BATT |
| Batteries are exhausted. Replace the old batteries with new |
|
| ones. |
FULL ( | flashes at the | The remaining memory capacity of the IC recorder is |
same time) |
| insufficient. Erase some messages before recording. |
FULL (message number | As there are already 99 messages in the current folder, you | |
flashes at the same time) | cannot record a new message. Erase some messages before | |
|
| recording. |
FULL (folder indicator | As there are already 99 messages in the folder to which you | |
flashes at the same time) | want to move a message, you cannot move the message. Erase | |
|
| some messages before moving. |
SET DATE |
| Set the clock; otherwise, you cannot set the alarm. |
NO DATA |
| The selected folder does not have any messages. You cannot |
|
| lock a message, erase a message(s) or set the alarm, etc. |
Troubleshooting
65GB