Press ENTER on the unit.

5

6 Repeat steps 1 through 5 to store other stations.

You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power supply cord or if a power failure occurs.

To call up a preset radio station using the main unitPress PRESET +/repeatedly.To call up a preset radio station using the sub units

1Preset radio stations on the main unit (see “Presetting radio stations” (page 26)).

2Select the tuner channel.

Press S-AIR CH repeatedly until “TUNER” appears in the display.

3Select “FM” or “AM.”

Press and hold S-AIR CH until “FM” changes to “AM” or vice versa.

4Press PRESET +/repeatedly to select a preset station.To check the frequency of the station name

Press DISPLAY on the remote for the main unit or DISPLAY on the sub unit while the station name is displayed. To return the station name indication, press DISPLAY while the frequency is displayed.

The display on both the main unit and sub unit is switched if DISPLAY is pressed on either the main unit or sub unit.

Using an optional AV system

You can enjoy audio and video of the connected iPod with an optional AV system.

1 Connect an optional AV system (such as a TV, etc.) to the iPod AUDIO OUT L/R jacks and/or the iPod VIDEO OUT jack of the main unit using an optional audio cord and/or video cable.

2 Place an iPod on the iPod connector on the main unit.3 Start playback of the iPod.

See “Listening to iPod music using the S-AIR connection” (page 23).

Note

The tuner’s sound cannot be output through the iPod AUDIO OUT L/R jacks.

Before enjoying video, adjust the video settings on the iPod to the appropriate settings according to your situation.

Tip

Even if you change the S-AIR mode or the S-AIR channel using PARTY CH, audio and/or video from the connected iPod will continue to be output from the iPod AUDIO L/R jacks and/or the iPod VIDEO OUT jack.

Operations

27GB