Using the sub units
When a radio station is tuned on the main unit, you can listen to that station by following the steps below.
To tune in a radio station using the sub units, that station needs to be preset beforehand (see “To call up a preset radio station using the sub units” (page 27)).
1 Select the tuner channel.
Press
2 Select “FM” or “AM.”
Press and hold
If “TUNED” does not appear and the scanning does not stop, press TUNING +/on the remote (or TUNING/ SELECT +/on the unit) repeatedly to tune in the desired station.
To reduce static noise on a weak FM stereo station using the main unit
1Press SYSTEM MENU on the unit.
2Press TUNING/SELECT +/on the unit repeatedly until “FM MODE” appears, then press ENTER on the unit.
3Press TUNING/SELECT +/on the unit repeatedly until “MONO” appears, then press ENTER on the unit.
There will be no stereo effect, but the reception will improve.You can preset your favorite radio stations and tune them in instantly by selecting the corresponding preset number.
Use the main unit to preset the radio stations.1 Tune in the desired station.See “Listening to the radio using the3 Press TUNING/SELECT +/ on the unit repeatedly until “MEMORY” appears, then press ENTER on the unit.
Preset number
4 Press TUNING/SELECT +/on the unit repeatedly to select your desired preset number.
If another station is already assigned to the selected preset number,
the station is replaced by the new stations.