4 Press ENTER on the unit to exit the system menu.

Setting the clock of the sub units

Use buttons on the unit to set the clock.1 Press /to turn on the unit. 2 Select the clock set mode.

Press CLOCK/TIMER MENU. If the current mode appears on the display, press /repeatedly to select “CLOCK,” and then press CLOCK/ TIMER ENTER.

3 Set the time.

Press /repeatedly to set the hour, and then press CLOCK/TIMER ENTER. Use the same procedure to set the minute.

Note

The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

Getting Started

21GB